Low MOQ Guides

How Long Does It Really Take from Sample to Bulk Activewear?

Sample to bulk activewear takes 35 to 50 days: 10 to 15 days for samples, 25 to 35 days for bulk after approval. Here is where the time goes.

custom-cutout-tank-sports-bra-biker-shorts-set-2
From sample to bulk activewear usually takes 35 to 50 days at Duorui. Samples take 10 to 15 days after we confirm your design and logo, and bulk production takes 25 to 35 days after you approve the sample. This article fits a new brand that already has a design direction and needs a realistic launch date. It does not replace a confirmed production schedule for your specific order, because fabric availability and logo work can move the date, and we confirm the exact date before production starts.



Why a launch date slips even when the factory quotes 35 days
You pick a launch date, count back 35 days, and tell your customers the collection is coming. Then the sample arrives a week late, the fit is wrong in one place, and the bulk date moves again. The problem is rarely that the factory works slowly. The problem is that the quoted time only covers the work after everything is decided, and most new brands spend their first week still deciding. A buyer who has never ordered custom activewear often assumes that sample time and bulk time overlap, or that approval is a formality. They are not. Sample approval is the gate. Bulk does not start until you say the sample is right, and every round of changes after that gate adds days that were never in the original quote. If you want a date you can trust, you need to see where the days actually go, and which of those days you control.

What the 10 to 15 sample days actually cover






Sample time starts when the design and logo are confirmed, not when you first send an email. Before that point, we still need to confirm the style, the fabric, the colour, the sizes, and the logo position and size. A sample for one style in one colour costs 50 US dollars per piece. If your logo needs a silicone mould, that mould costs 35 to 40 US dollars once, and it is a one-time cost for that logo. The sample itself is made to your confirmed measurements. During those 10 to 15 days, the factory cuts the fabric, sews the sample, applies the logo, and checks it before sending it to you. The check matters because a sample that leaves the factory with a visible defect costs you more time than a sample that is held back for one more day. When the sample arrives, try it on, wash it once if your customers will wash it often, and check the fit in movement, not only standing still. A yoga set that looks right on a hanger can pull in the wrong place when you stretch, and that is the kind of problem you want to find at the sample stage, when fixing it costs days, rather than at the bulk stage, when fixing it costs a whole production run. Plan your order around the minimum as well. Bulk orders start at 100 to 150 pieces per style per colour, and sizes can be mixed inside that quantity, so a brand that needs four sizes does not need 100 pieces in each size. That minimum is what makes the bulk schedule realistic, because the factory is setting up one production run for a defined quantity, not guessing how many pieces will be ordered after the sample is approved. If your launch needs more than one style, count each style separately, because each style has its own sample and its own bulk run, and the dates only line up if the samples for all styles are approved together.

How to decide without adding a second sample round


Most delays come from a second sample round, and most second rounds come from a decision that was left vague in the first round. The fastest way to avoid that is to decide three things before the sample is cut. First, decide the fabric and the colour in writing, with a clear name for each, so the factory does not have to guess between two similar shades. Second, decide the logo in full, including its size, its position, and whether it is silicone print, flat print, or embroidery, because a logo that changes after the sample is cut means the sample must be remade. Third, decide who approves the sample and how quickly, because a sample that sits on a desk for a week adds a week to your launch, and that week is not in any factory quote. If you can answer those three points before sampling, one sample round is usually enough. If you cannot, it is better to say so early and let the factory tell you what is missing, rather than to approve a sample that was built on a guess. A clear no at the start is cheaper than a polite y
es that leads to a remake.


What can still go wrong after you approve the sample

Approval does not remove risk, it only moves the risk into bulk production, where the stakes are higher. The most common problem after approval is a fabric change. A fabric that was available for one sample may need to be reordered for 100 to 150 pieces per style per colour, and that reorder can add days if the colour is not in stock. The second problem is a size problem that only shows up across a full size run. A sample in size S can fit well while size XL pulls at the same seam, and that is why the sample should be checked against the full size range you plan to order, not only against the sample size. The third problem is a logo problem at scale. A silicone logo that looks clean on one sample can need a mould adjustment when it is applied to 100 pieces, and that adjustment is part of why the mould fee is charged once and why the logo is confirmed before bulk. None of these problems means the factory failed. They mean that bulk production is a different job from making one sample, and the bulk schedule of 25 to 35 days already assumes that the fabric, the sizes, and the logo were settled at approval. If any of those three changes after approval, the date must be recalculated, and the honest thing is to recalculate it then, not to pretend the old date still holds.

Your next step: lock the date in three moves



First, send us your design, your fabric and colour choice, and your logo file with its size and position, and tell us the date you need the bulk goods to leave the factory. Second, we will confirm the sample cost and time for your style, including whether a 35 to 40 US dollar logo mould is needed, and we will give you a sample date and a bulk date in writing before you pay for the sample. Third, approve the sample only when you have tried it, checked the fit in movement, and confirmed the logo and the colour, and then we start bulk production the same week. If you send your design today, the sample clock starts when the design and logo are confirmed, not when the email arrives, so the fastest move is to close the three open points above. To start, send your design and logo through the inquiry form and tell us your target ship date. We will reply within 1 business day with your sample cost, your sample date, and your bulk date, so you can plan your launch around a date that is written down, not guessed.



CONTINUE LEARNING

Explore More Activewear Manufacturing Guides

Compare fabrics, confirm MOQ and plan samples, fit and branding before developing your private label collection.

EXPLORE MANUFACTURING PROGRAMS

Turn These Insights Into Your Next Collection

Choose your product direction and share preferred styles, quantities, colors and branding needs. A tech pack is helpful but optional; reference images or a short brief are welcome.

Email

anna@duoruiapparels.com

Send product requirements, quantity and target market for a quotation.

WhatsApp

+86 131 7807 2002

Share reference images and receive direct development feedback.

Minimum Order

From 100 pcs per style/color

Some styles require 150 pcs. Final MOQ depends on fabric, color, design and customization.

Response Time

Within 1 business day

We review your project and recommend the next practical step.