One sample order can tell you almost everything you need to know about a new activewear supplier, if you order it the right way. Order one style in your real size, your real colour, and with your real logo on it, and then test it the way your customer will wear it: move in it, stretch it, wash it, and check every seam and label. A sample costs 50 US dollars per piece, and if your logo needs a silicone mould, that mould costs 35 to 40 US dollars once. Sampling takes 10 to 15 days after your design and logo are confirmed, and bulk production takes 25 to 35 days after you approve the sample. This article is for a new brand that has found a supplier and wants to know whether to trust it with a bulk order. It gives you the checklist for that one sample order: what to order, what to test, and what must pass before you pay a deposit. It is not for a brand that has already approved a sample and only wants a bulk price, because the bulk price and the shipping price are both quoted for each order and are not fixed in this article.
Order your real product, not a showroom piece
The first mistake is ordering a sample that is not the product you will sell. A sample in the wrong size, the wrong colour, or without your logo tells you almost nothing, because the factory has not yet proved it can make your product. Your sample should be one style in your size, in your colour, with your logo in your size and in your position. If you sell leggings, order the legging you will sell, not the easiest style in the catalogue. If your brand colour is a deep navy, order the deep navy, not the black that is already on the shelf, because the colour you will sell is the colour that has to be right. Your logo should be applied the way it will be applied on the bulk order, whether that is a silicone logo, a flat print, or embroidery, because a sample without your logo cannot show you whether the logo will hold, peel, or crack. A silicone logo is slightly raised and has a soft three-dimensional feel, and the mould for it costs 35 to 40 US dollars once for that logo, so if your sample needs a silicone mould, that cost is part of the sample, not part of the bulk order. One style, tested properly, tells you more than five styles glanced at, because a supplier that cuts one style well and answers every question clearly will usually cut the next style well too, while a supplier that rushes five samples and answers nothing has already told you how the bulk order will go. If your budget allows, order a second size of the same style as well, because two sizes show you whether the size range holds together, while one size only shows you that one size. Either way, keep the test to one style and spend your attention on it, because attention is what turns a sample from a parcel into a verdict.
Wear it the way your customer will
A sample that only hangs on a hanger has not been tested. Put it on in your size and move in it the way your customer will move in it. Sit down in it, squat in it, stretch up in it, and walk in it for a full day, because a legging that looks right standing still can go sheer in a deep squat, and a waistband that feels fine for five minutes can roll or dig in after an hour. The squat test is the one test you must not skip: in a deep squat, in daylight, check whether the fabric stays opaque across the seat and the thighs, because a legging that goes see-through under stretch will come back as complaints, and no logo will save it. Check the waistband while you move. It should sit flat and stay where you put it, without rolling down at the front or gaping at the back when you bend. Check the seams where the body bends, at the inner thigh, under the arm, and across the back, because a seam that pulls, puckers, or digs in during movement will only get worse in bulk, when a hundred pieces carry the same mistake. Check the length as well, because a legging that is right in the waist and wrong at the ankle is still wrong, and a top that rides up every time you raise your arms will ride up for your customer too. Take notes while you wear it, in writing, with the time and the movement that caused each problem, because a note that says the waistband rolled after forty minutes of sitting is evidence the factory can act on, while a note that says it felt wrong is not. If the sample fails the wear test, say so in writing and say exactly where it failed, because the factory can only fix what you name.
Check the fabric and the stitching with your hands
The fabric is the part your customer feels first, so check it with your hands before you check anything else. Our standard performance fabric is 78 percent nylon and 22 percent spandex at 230 grams per square metre, a blend that is smooth, stretchy in four directions, and matte rather than shiny, and the sample should feel like that: smooth to the touch, soft against the skin, and with a stretch that springs back when you let go, rather than staying stretched out. Pull a section of the fabric and let it go, then pull it again, because a fabric that recovers its shape after stretching will keep its shape on your customer, while a fabric that stays baggy after one pull will stay baggy after one wash. Hold the fabric up to the light and stretch it, because thin spots and uneven dyeing show up in light before they show up on the body. Then look at the stitching, one seam at a time, because stitching is where a cheap sample gives itself away. The stitches should be even, with no skipped stitches, no loose threads, and no puckering along the seam. The seam allowances should be even too, and the inside of the garment should be as clean as the outside, because a customer who turns a legging inside out to wash it will see the inside, and loose threads there are a quality complaint waiting to happen. Check the hem and the cuffs for the same even stitching, and check any drawstring, zip, or elastic for smooth movement rather than catching or twisting. If the fabric or the stitching is wrong, the sample has failed, even if the fit is right, because fit is a pattern decision and fabric is a material decision, and both have to pass before bulk.
Test the logo and the labels, then wash it
The logo is your brand on the garment, so test it harder than any other part. A silicone logo should sit flat, feel slightly raised and soft, and stay bonded to the fabric when you stretch the fabric under it, because a logo that lifts at the edges when the fabric stretches will peel in wear. A printed logo should be sharp at the edges, with no cracking when you stretch the fabric gently, and an embroidered logo should be dense and even, with no loose threads and no puckering of the fabric underneath it. Check the size and the position against what you confirmed in writing, with a ruler, because a logo that is one centimetre off centre on a sample will be one centimetre off centre on a hundred pieces. Then check the labels, because your woven labels, wash labels, and hangtags are part of the product, and a sample with the wrong label, the wrong size marking, or a missing wash label has not yet proved the factory can finish your order. After the visual check, wash the sample once, by hand, in cold water, and let it air dry, because one wash shows you what three washes will do. Check whether the colour ran, whether the fabric lost its stretch, whether the logo lifted or cracked, and whether any seam came loose. If the sample survives one wash unchanged, it is a good sign. If the logo peels after one wash, the sample has failed, and no bulk order should follow until the factory explains why and shows you a fixed sample.
Judge the supplier, not just the sample
A sample tests the factory's hands, but the way the sample was handled tests the factory itself, and both matter. Note how long the sample took, because sampling takes 10 to 15 days after your design and logo are confirmed, and a sample that arrives on the promised date is evidence of a factory that keeps its word, while a sample that arrives late with no explanation is evidence of how your bulk order will be handled. Note whether the factory confirmed your design, your logo size and position, and your quantities in writing before cutting, because a factory that works from written confirmation is a factory that can be held to a standard, while a factory that works from a vague conversation will blame the conversation when the product is wrong. Note whether the price was clear before you paid: the sample at 50 US dollars per piece, the silicone mould at 35 to 40 US dollars once if your logo needs one, and the bulk terms confirmed in writing before any deposit. Payment on the bulk order is a 30 percent deposit by bank transfer or PayPal, and shipping is quoted for each order, because the cost depends on the weight, the quantity, and where the goods are going, so a supplier that quotes a fixed shipping price before knowing the weight and the destination is guessing, not quoting. A supplier that answers questions clearly, confirms details in writing, and delivers the sample on time has passed the second half of the test, even if the sample itself needs one small fix. A supplier that is slow, vague, or unwilling to put anything in writing has failed the test even if the sample looks good, because a good sample from a careless supplier is still a careless supplier.
Your next step: write the verdict before you pay anything
When the sample arrives, do not pay a bulk deposit on the same day. Wear the sample, wash it once, check the fabric and the stitching, measure the logo, and write down what passed and what failed, in one short message to the supplier. If everything passed, confirm in writing that the sample is approved, and then ask for the bulk quotation with your quantities per style per colour and your target ship date, so that the bulk production time of 25 to 35 days can be counted from the approval date, not from the day you first emailed. If something failed, name the failure precisely, with a photo and the movement or the wash that caused it, and ask the factory to explain the cause and to make a corrected sample, because a second sample that fixes the problem is still cheaper than a bulk order that carries it. If the supplier will not explain or will not correct the sample, do not pay the deposit, because the sample order has done its job: it has told you, for the price of one sample, that this supplier is not the right one. To start your own test, send us the style you want to sample, your size, your colour, and your logo file with its size and position, and tell us the quantities you want per style per colour and the date you need the bulk goods to leave the factory. We will confirm the sample cost, whether a 35 to 40 US dollar logo mould is needed, and the sample date in writing before you pay anything, and we will reply within 1 business day.